€634.17
pcs
Item description
Suitable:
These solenoid-operated way valves are used in hydraulic systems predominantly for starting, stopping and changing the direction of flow of the liquid. Using NG 6 the pressure valve, the flow control valve and the check valve sandwich plates are arranged like a stack to form a circuit in the smallest space possible.

Materials:
Body: Spheroidal cast iron, internal parts: Steel, seals: NBR

Temperature range:
-30 to +80 °C

Media:
Hydraulic oils on the basis of mineral oil (viscosity: Bosch Rexroth: 2,8 - 500 mm²/s, alternatively: 20 - 400 mm²/s)

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65

Operating pressure:
0 to 350 bar

Nominal flow:
Up to approx. 80 l/min (request pressure loss curves if required), we recommend usage up to approx. 40 l/min

Note:
The connection pattern NG 6 is standardised in accordance with DIN 24340-A6, ISO 4401-03, CETOP R 35 H-03 and NFPA-D03. The valves must be attached with screws of strength class 12.9.

Scope of delivery:
Valve including seals, without screws and plugs.

Warning:
Please do not forget to order screws and valve plugs.
Properties
Ver­sion Bosch-​Rexroth
func­tion 4/3-​directional valve
Schematic sym­bol G
Con­trol volt­age 230 V AC
Power con­sump­tion (AC) [VA] 50
com­pat­i­ble stan­dard con­nec­tor ST 03
suit­able screws (4 pcs. per valve re­quired) 912-​M5X50 ST 12.9
Spare so­le­noid coil 4WE6MAG230V
A [mm] 203,6
C [mm] 85,5
Screw length [mm] 50
Further information on 4WE6G6X/EW230N9K4
Weight 1,7 kg / pcs
Customs duty number 84812010
RoHS compliant Yes
Manufacturer Bosch-Rexroth
Documents
*our recommendation for use

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available