Item group

Connection plates for valves NG 6

Exemplary representation: NG 6 connection plate

Description:

The connections A & B are positioned lateral to the valve connection surface. Pressure and return flow connections P & T are drilled through and can be optionally used by both the sides. The connection plate can be mounted using either the M 8-female thread on the front side or the mounting holes* positioned longitudinally.

Materials:

Grey cast iron

Temperature range:

-20 to +80 °C

Operating pressure:

max. 315 bar

Nominal flow:

Max. 30 l/min (GRPS 61: max. 50 l/min)

Note:

The connection pattern NG 6 is standardised in accordance with DIN 24340-A6, ISO 4401-03, CETOP R 35 H-03 and NFPA-D03. The valves must be attached with screws of strength class 12.9.
*at type GRPS 61: P & T not drilled through, attachment from above

{{ $t('shop.all.dokumente') }}:

  • Catalogue page Atlas 9 (Page 812_813_n) atlas9_neutral_seiten/812_813_n.pdf
{{ $t('shop.display.artikelgruppe.mehr_informationen') }} {{ $t('shop.display.artikelgruppe.weniger_informationen') }}

{{ $t('shop.display.artikelgruppe.filtern') }}

{{ $t('shop.display.artikelgruppe.kein_eintrag') }}
Connection plates for valves NG 6:
{{ $t('shop.all.artikelgruppe_n_von_m_artikeln', { anzahlArtikelAngezeigt: anzahlArtikelAngezeigt, anzahlArtikelGesamt: anzahlArtikelGesamt} ) }}
179,54€ incl. VAT
207,49€ incl. VAT
286,88€ incl. VAT
330,34€ incl. VAT
401,09€ incl. VAT
457,10€ incl. VAT
529,08€ incl. VAT
597,19€ incl. VAT
{{ $t('shop.all.unverbindliche_richtwerte') }}
{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.