HGPT-16-A-B (560192) parallel gripper

Item number:

OT-FESTO025493

€627.12
pcs
Properties
size 16
Stroke per grip­per jaw [mm] 3,0
Max. ex­change pre­ci­sion [mm] <= 0,2 mm
Max. grip­per jaw play ax, ay [deg] <= 0,1 deg
Max. grip­per jaw play Sz [mm] <= 0,02 mm
Ro­ta­tional sym­me­try [mm] <= 0,2 mm
Re­peata­bil­ity grip­pers [mm] <= 0,03 mm
Quan­tity Grip­per jaws 2
in­stal­la­tion po­si­tion ar­bi­trary
Prin­ci­ple of op­er­a­tion dou­ble act­ing
Grip­per func­tion Par­al­lel
Con­struc­tion set up In­clined plane,
Force con­trolled move­ment cycle
Po­si­tion de­tec­tion For prox­im­ity switch
Open total grip­ping force at 6 bar [N] 120
Close total grip­ping force at 6 bar [N] 106
Op­er­at­ing pres­sure [bar] 3 to 8
Op­er­at­ing pres­sure block­ing air [bar] 0 to 0.5
Max. work­ing fre­quency grip­per [Hz] <= 3 Hz
Min. open­ing time a 6 bar [ms] 9
Min. clos­ing time at 6 bar [ms] 11
Op­er­at­ing medium Com­pressed air to ISO 8573-​1:2010 [7:4:4]
In­for­ma­tion about op­er­at­ing and con­trol medium Oiled op­er­a­tion pos­si­ble (re­quired in fur­ther op­er­a­tions)
Cor­ro­sion re­sis­tant class KBK 2 - mod­er­ate cor­ro­sion stress
Pro­tec­tion cat­e­gory IP40
am­bi­ent tem­per­a­ture [°C] 5 to 60
Open grip­per jaws at grip­ping force of 6 bar [N] 60
Close grip­per jaws at grip­ping force at 6 bar [N] 53
Mass in­er­tia [kg/cm²] 0,141
Max. force on grip­per jaws Fz sta­tic [N] 200
Max. torque on grip­per jaws Mx sta­tic [Nm] 10
Max. torque on grip­per jaws My sta­tic [Nm] 12
Max. torque on grip­per jaws Mz sta­tic [Nm] 6
Lu­bri­ca­tion in­ter­val guide el­e­ments [Mio SP] 5
Max. mass per ex­ter­nal griper fin­ger [g] 40
Prod­uct weight [g] 85
Fas­ten­ing type With Through­way bore and dowel pin,
With Fe­male thread and dowel pin,
Se­lec­tively:,
Fe­male thread and cen­tring sleeve,
With Through­way bore and cen­tring sleeve
Pneu­matic con­nec­tion block­ing air M3
Pneu­matic con­nec­tion M5
Ma­te­r­ial in­for­ma­tion Cop­per and PTFE-​free,
RoHs com­pli­ant
Cover cap ma­te­r­ial High-​alloyed stain­less steels
Hous­ing ma­te­r­ial alu­minium,
an­odized
Grip­per jaws ma­te­r­ial hard­ened,
Steel
Further information on OT-FESTO025493
Weight 85 g / pcs
Customs duty number 84798997
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available
Weekend shipping

Simply order on the weekend by Sunday at 15:00 h (or if Monday is a public holiday, by Monday at 15:00 h) and you will receive your merchandise within Germany via GLS on the next working day by 12:00 h (charge: 5%, min. € 30,00).