FISCHER liquid fixing fill & fix, complete set

Item number:

DUBEL FILLFIX

€25.08
pcs
Item description
Application:
Solvent free polyurethane based injection compound. It is injected into a hole, expands there into the defined volume and cures at room temperature in around 2 to 5 minutes. It is suitable for anchoring fixing elements, to fill and repair broken boreholes or as a repair compound for wood based materials. You can screw screws and eyelets etc. of diameters between 2 and 6 mm into and out of the hardened compound, just as you can with wood. Ideal for renovation work and wood repairs, compatible with all building materials (new and old).

Temperature range:
-10 to +40 °C

Note:
For industrial or commercial use only! Appropriate training must be provided before use. An order shall obligate to compliance with above conditions.
Properties
De­scrip­tion Com­plete set suf­fi­cient for min. 4 bore­holes Ø 10 mm and 50 mm deep con­sist­ing of: 1x re­seal­able car­tridge (25 ml in­jec­tion com­pound), 2x mix noz­zle, 2x ex­ten­sion tube (for fill­ing smaller, deeper holes), 4x in­jec­tion an­chor sleeves (for hole or board ma­te­ri­als)
Danger
Reizend Gesundheitsschädlich Umweltgefährlich
Further information on DUBELFILLFIX
Weight 100 g / pcs
Customs duty number 32141010
Manufacturer Fischer
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available