EMMS-ST-28-L-SB (1451383) stepper motor

OT-FESTO034672

Exemplary representation: EMMS-ST-28-L-SB
774,51€ incl. VAT
pcs
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.eigenschaften_headline') }}
ambient temperature [°C] -10 to 50
Bearing temperature [°C] -20 to 70
Relative humidity 0 - 85 %
Complies to standard IEC 60034
Insulation protection class B
Heat class to EN 60034-1 B
Measurement class according to DIN 60034-1 S1
Protection category IP65
Electrical connection technology Plug
Material information RoHs compliant
Corrosion resistant class KBK 1 - low corrosion stress
Permission RCM mark,
c UL us - Recognized (OL)
CE certificate (see declaration of conformity) to EU EMC directive
Nominal operating voltage DC [V] 48
Holding torque motor [Nm] 0,09
Max. speed [1/min] 6.000
Step angle at full step [deg] 1,8
Step angle tolerance ±5 %
Nominal current motor [A] 1,4
Voltage constant phase [mVmin] 6,0
Winding resistance phase [Ohm] 2,30
Winding inductivity phase [mH] 1,40
Mass inertia Rotor [kg/cm²] 0,018
Total output moment of gyration [kg/cm²] 0,025
Product weight [g] 380
Permitted axial shaft loading [N] 7
Permitted radial shaft loading [N] 20
Holding torque brake [Nm] 0,2
Operating voltage DC brakes [V] 24
Power consumption brake [W] 8
Mass inertia Brake [kg/cm²] 0,007
OT-FESTO034672
{{ $t('shop.all.gewicht') }} 380 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }} 85015100
{{ $t('shop.all.hersteller') }} Festo
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Accessories

{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.