€755.36
pcs
Item description
Version:
elastic, form-pressed bellows, reinforcement carrier made of synthetic fibres, connections screwed on both the sides

Equalising capacity:
axial (compression/extension), lateral (lateral offset), angular (angular deviation)

Materials:
Bellows: EPDM (hot water, acid and alkalis resistant), thread connections: Malleable cast iron, galvanised zinc plated, flat seal: Aramide NBR

Temperature range:
max. +110 °C (depending on operating pressure)

Operating pressure:
-1 to 16 bar (from +60°C: 10 bar, from +100°C: 6 bar), burst pressure: 50 bar (For intermittent loading, the max. operating pressure should be set approx. 30% lower)

Warning:
When installing the compensator, it is urged to follow the assembly instructions in all cases!

Optional:
Bellows from NBR, oil resistant -B
Properties
G1 R 1-1/4" (male thread)
G2 G 1-1/4" (fe­male thread)
Bel­lows ver­sion NBR
Ver­sion Male/fe­male thread
DN [mm] 32
Axial com­pres­sion [mm] 30
Axial stretch­ing [mm] 10
Lat­eral off­set [mm] 15
An­gu­lar de­vi­a­tion [°] 25
L [mm] 212
SW1 [mm] 75
SW2 [mm] 47
Further information on KOM32AGIG-B
Weight 2,6 kg / pcs
Customs duty number 40169991
RoHS compliant Yes
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available